Development and performance evaluation of tropospheric scintillation model on Ku-band satellite link over Akure,Nigeria

Existing amplitude scintillation prediction models often perform less satisfactorily when deployed outside the regions where they were formulated. This necessitates the need to evaluate the performance of scintillation models developed in one region using data data from other regions while documenting their relative errors. Due to its variation with elevation angle, frequency, other link parameters and meteorological factors, we employed three years (January 2016 to December 2018) of concurrently measured satellite radio beacons and tropospheric weather parameters to develop a location-based amplitude scintillation prediction model over the Earth-space path of Akure (7.17^oN, 5.18^oE), South-western Nigeria. The satellite beacon measurement used Tektronix Y400 NetTek Analyzer at 1 s integration time while meteorological parameters, namely; temperature, pressure and relative humidity were measured using Davis Vantage Vue weather station at 1 min integration time. Comparative study of the model’s performance with nine (9) existing scintillation prediction models indicates that the best and worst performing models, in terms of root mean square error (RMSE), are the Statistical Temperature and Refractivity (STN) and direct physical and statistical prediction (DPSP) models with values 11.48 and 51.03 respectively. Also, worst month analysis indicates that April, with respective enhancement and fade values of 0.88 and 0.90 dB for 0.01% exceedance, is the overall worst calendar month for amplitude scintillation.     

抗辐照通用扩展SiP芯片设计

研究微小卫星综合电子系统的SiP技术实现方法。首先介绍微小卫星综合电子系统结构的组成和采用SiP技术的必要性，然后对综合电子系统进行功能模块划分，并对其通用扩展模块进行详细的SiP设计，包括抗辐照器件选型、原型验证、SiP原理图、基板管壳一体化设计、建模仿真、制造加工、实装测试验证等，通过SiP技术实现了一种星载综合电子系统中通用扩展SiP芯片产品，经过实际验证测试，在保证模块功能和性能的前提下，整体模块重量从230 g减轻到48 g，体积由180 mm?130 mm?17 mm减小到46 mm?46 mm?8 mm，很好地满足了星载功能模块小型化、轻量化设计需求。     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

PDM技术及其在直升机研制中的作用

本文首先分析了当前直升机在运用CAD/CAE/CAM技术进行研制中存在的一些问题,接着提供了解决的方法,介绍了PDM的概念、构成、主要功能。最后简述了PDM技术在直升机研制中的作用,以及企业在实施PDM当中应注意的一些问题。     

关于CCSDS体制数据安全保护实施位置的探讨

主要阐述CCSDS（空间数据系统咨询委员会）标准的信息安全问题，重点是航天器安全，从分析空间数据面临的安全威胁出发，讨论了CCSDS不同安全实施位置的特点；并在此基础上，通过对CCSDS业务及数据结构的影响对比，总结出不同安全实施方法的优缺点，该结合对于采用CCSDS标准的空间数据系统如何解决信息安全问题，具有一定的参考价值。     

原子时自动测量及数据采集系统

介绍了普通的时间实验室的时频测量,实现自动测量和数据收集的基本系统方案,并以上海天文台原子时实验室为例介绍了实际可行的自动测量和数据收集系统,这个系统高性能、低价格,可应用于国内几乎所有的时间实验室。     

基于分布式数据库的遥测数据处理系统

根据导弹技术的未来发展规划以及遥测数据处理技术的发展趋势,提出如何将分布式数据库这一技术应用到靶场导弹的遥测事后数据处理中,并从各方面详述该系统的布局结构和功能设计。     

CBERS-1卫星IRMSS数据在城市绿地系统规划的应用

文章以CBERS -1卫星长沙幅IRMSS数据作为基础资料 ,利用PCI遥感图像处理软件对数据进行了预处理和应用实验。实验证明CBERS -1卫星的IRMSS数据图像信息丰富 ,可解译程度较高 ,能满足大中城市中等比例尺城市绿地系统规划遥感调查的要求     

串联系统耗用资源最小的一种直接寻优算法

本文提出了串联系统在满足系统目标可靠性要求y之下,使非线性约束(资源)达到极小的一种直接寻优算法。     

KVM技术在网络服务器管理上的应用

KVM技术又称多电脑共享器 ,其在网络服务器的管理上的应用具有广阔的发展前景。